3DAMSS FZE retweeted
Take your next step into large-scale 3D Printing with the FUNMAT PRO 610 HT and its build volume of up to 610x508x508mm. The system extremely high chamber temperature of 300°C enables to print large size high-performance materials without cracking.
Visit: intamsys.com/funmat-pro-610-…
3DAMSS FZE retweeted
I need a job bad.... I hate this shutdown.
#autism #actuallyautistic #AutismAwareness #AutismAndCovid19
3DAMSS FZE retweeted
BLOG: Have you seen our comparison between
@Gearbox_3D HT2 and @Stratasys Fortus 380mc Carbon Fiber Edition? Check out this blog post for all of the info! buff.ly/2QqlsiC
#AdditiveManufacturing #3Dprinting #Innovation #3Dprinter #TechnologyNews #TechTuesday
3DAMSS FZE retweeted
Deez nuts are in @3dxtech ULTEM 9085... and Jay is about to test some more experimental PEEK! 🔥🔥🔥 #cartesianrobot #3dprinter #hightemp
3DAMSS FZE retweeted
#SLS, #MJF,#SLA, #FDM, PA12, Stainless steel, ULTEM, PEEK, PPSF @3DAMSS79 @3dxtech @3d4makers @VisionMiner @THINDUSTRIES @intamsys_3d @Shmaggy3d @EOSGmbH @FarsoonAM @HP Here are 3D Printed parts were sent out to customers, so proud of being one member of the AM Industry.
3DAMSS FZE retweeted
Here is the result of our metal 3d printing,#stainless steel 316L, high strength with fine details. @EOSGmbH @3DAMSS79 @VisionMiner @THINDUSTRIES @Shmaggy3d
3DAMSS FZE retweeted
Six 3D printers going through the night... @TH3DStudio @Ultimaker @intamsys_3d @Creality3dprint @monoprice – at Irvine, CA
3DAMSS FZE retweeted
Some PACF filament from the @essentium3d guys & gals — printing a laptop stand for the office, we’ll see how the rigidity stands up on this 2mm wide extrusion 🔥🔥🔥#cfnylon #manufacturing – at Irvine, CA
3DAMSS FZE retweeted
#3dprinting PEHD filament on our @creatbot3dprint
Hard to print but we success to do it
#impression3d
#Industry40
3DAMSS FZE retweeted
If you could have a new color of #PETG that glows under black light what would you make? (It’s transparent UV glow yellow) Just in time for Halloween! 🎃 3dxtech.com/max-g-petg-3d-fi… #filament #3dprinting #innovation #Halloween #Tech
3DAMSS FZE retweeted
I'm in love with the look and strength of #ultem9085
These parts will never need to be replaced
#fdm #diy #aerospace
#make #3dprint
3DAMSS FZE retweeted
PEEK going down solid on the MIC6 cast aluminum of the @CINCINNATI_INC SAAM HT — with a heated bed at 220°C — no warping in this solid print! #3dprinted #solid
3DAMSS FZE retweeted
Bye bye carbon plate! Welcome to ceramic plate for my @intamsys_3d funmat ht
3DAMSS FZE retweeted
MAX-G™ PETG is made using premium resins & colorants. We recommend this #filament for use in practically any desktop #3DPrinter that has a heated bed. For more information or to purchase our products please visit buff.ly/2W4epQP #3Dprinting #additivemanufacturing
3DAMSS FZE retweeted
Print aerospace-grade parts with ULTEM 9085 from SABIC and @3dxtech, available in our store! DM for more info 🔥🔥🔥 #3dprinting
3DAMSS FZE retweeted
New! CarbonX™ Carbon Fiber PC/ABS is a low-gloss structural material that was created to offer the optimal blend of printability and performance. Now available at buff.ly/2Zdgc3y #Innovation #Filament #Tech #3Dprinting #AdditiveManufacturing
3DAMSS FZE retweeted
Nano Polymer Adhesive in action! For PLA, just let the bed cool, and the part pops off with zero effort. Then, just print again on the same surface! 🔥🔥🔥 find out more at visionminer.com/adhesive 🔥🚀 @3dxtech @joeltelling @SliceEngineer @THEJATMN
3DAMSS FZE retweeted
SLA Case Study
Application: Temp., Humitidy, PM2.5 monitor
Technology: @formlabs, @3Dsystems
Material: ABS-Like @DSM Company
Cost comparison:
3D Printing with USD50,
Traditional way USD3000 for one set mould
Leading Time: 2 days per set
youtu.be/tIOLJT3C7Iw 来自 @YouTube






















