Gary Bowser (@Bowser_GaryOPA) header
Gary Bowser (@Bowser_GaryOPA) profile picture

My company Oasis Pensive Abacutors, produces retro computing and gaming products and also offers complete cybersecurity management for your websites and company

Toronto, Ontario
Joined June 2023
Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)
VCF Montreal v2.0 - Gary Bowser (GaryOPA) Keeping the TI-99/4A Alive: Community, Modern Hardware, and the AI-Assisted Future youtube.com/watch?v=jZt8oWPL… Originally livestreamed on Sunday at VCF. I had many discussions during the 3 days, and thanks to everyone that attended in-person.
1
2
5
428
First day was very busy at VCF Montreal v2.0 is now over. Now to relax and get ready for my big TI99 speech early tomorrow morning...
5
4
32
1,519
Well on the train heading to VCF Montreal... Looking forward to meeting everyone... Lots of cool stuff to see at our table... And if you can't attend, at least TuneIn to my speech Sunday morning...
3
23
473
GaryOPA Presents Restoration of a TI Dimension 4 Engineering Prototype youtube.com/watch?v=u0wg2kwW… ​Before the TI-99/4A and /4, Texas Instruments was working on the TI Dimension 4 during the mid '70s as their first Home Computer... Today, we are going to restore one of the early 1977 "engineering prototypes", so we can see how it works, and what we lost, as a number of features got removed for the consumer release of the /4 in 1979. First off, I made this 28 minute video for recent Chicago Fair as exclusive, now that their show is over, I am publishing it for all to enjoy that didn't attend the Chicago Fair yesterday. The video is at points a little boring, you may want to watch it at 1.25x or 1.5x speed, if sitting thru bad camera work and low audio with me running my techie mouth too much is too long for you. Some key points about my TI Dimension 4 prototype it is marked #172 (but I don't know what Engineer owed it at TI, but sadly he died recently, and lucky enough his family had estate sale in Texas, and I lucked out and was able to purchase it at fairly decent price with a bunch of other TI Promo items, another /4a console, some tapes, and prototype of Speech unit and Editor cart.) Besides the YT video below, I have also attached some screenshots of the unit, and thanks to Tursi I have a special patched version of his amazing Classic99 basically working now, allowing me to use the dumped GROMs and ROM's from the system, as one of the first things I did was do a full dump of the main stuff, before I turned it on, just incase it went to the magical smoke heaven. The reason Classic99 had to be patched is even tho it uses the same horrible keyboard as the /4 console, it is not connected the same way, in fact its more faster system, in our beloved /4a and in /4 you tell the 9901 what row you want to read, wait a bit for it settle, and then read back the column via the 9901 to find out what key is pressed. -- On the Dimension 4, address lines are used, so you only need to poll the 9901, the CRU address is latched and that is used to pick the row you want to read, so its faster polling to get the keypress. -- One of the reasons for this, is they needed the other 9901 lines for the 4 player wireless joystick system, which is the main thing i want to re-create based on all the information I have now, I think its very possible in the near future to have nice set of joysticks with the keypad on them, as we now have all the pieces, schematics and pinouts of how this Dimension 4 was wired up, various other papers about the keyboard matrix encoder used on the joysticks, i have a pair of wired prototypes as well with this unit, and of course working dumps which I can now disassembly and document how everything works. The other interesting thing about the TI Dimension 4 is that the DIN 5 plug that we all know as our video/audio connector is not that at all on this prototype, instead it is 3.58mhz clock, Sync, Ext. VDP in, DC control, Ground -- Which allows you to basically hook two consoles together and then the transparent color zero becomes the background of the other tms9918 vdp chip. -- Audio is only available thru the headphone jack in the front, and Video is from an BNC connector on the part, or via the RF Modulator which is on-board the motherboard as well. The final interesting thing is that its made of two boards sandwich together, one of the reasons for this is that they were busy working on TMS9985 CPU, but it wasn't ready at the time, that was going to be the 8-bit version of our 9900 with the 256bytes of ram on the chip, so as such the engineers decided to put all the i/o -- the 8 bit sideport, joystick, the cartridge port, the groms, the sound, the 9901, the keyboard, the rf modulator, cassette port, all on one big board, and then there is 3 rows of connectors, for secondary daughterboard, that contains, the cpu, vdp, ram, rom, and in my prototype the 16 to 8 bit converter since my daughterboard has 9900 cpu on it, along with TMX9918 (prototype vdp) and the 4K of VDP Ram (yes, originally our machines were going to ship with only 4k). --- Now on this daughterboard there is also a secondary expansion port going out the back. -- On the official schematics with the planed TMS9985 cpu, this expansion port was going to be less than cartridge size, and be solely used to expand the vdp ram from 4k to 16k using a little module hanging out the back. - On my prototype the expansion bus is infact bigger, with not only the vdp ram expansion, but a full 16bit access to the 9900 and memory mapping. -- Too bad that was lost in our final version, it would had been interesting to see a TI99 with both 16bit and 8bit buses working together, depending on what you wanted. -- I am going to document this bus more along with control lines and see if we can recreate it with a future new motherboard. -- These 3 rows used to connect an daughterboard could also be used to recreate the "ranger" Z80 version that was designed at least on paper, I never seen one, but we have the schematics for it, so it would be interesting for fun to build that board and see what a TI99 as z80 machine would had been like. Ok, that is enough rambling along, 90% of you will not read all the wordly stuff above, so let's take a look at the video and photos and screenshots of it running in Classic99. -- I will make more videos, and post more information over the next few months, right now my focus over the 11 (yikes only 11 left) days, is to get everything ready for my trip, speech, exhibit to VCF Montreal v2.0. (Hopefully, you can make the trip in-person, or at least watch it online!)
2
14
919
VCF Montreal v2.0 is just around the corner, basically only a month to go, so hopefully we will meet & greet with a lot of fellow retro tech hobbyists during the November weekend 7th & 8th. Besides being a "guest speaker" on Sunday at 9am, I will also be running an Texas Instruments exhibit during the weekend, so looking forward to having discussions with many fans and introducing new people to the wonders of the TI-99/4A and their interesting & unique design. More Info: --> cvcfed.org/vcf-montreal-2-0/ Discover the past, present, and future of the Texas Instruments 16-bit computing legacy at VCF Montreal v2.0. Presented by GaryOPA (also a guest speaker on Sunday at 9am), this exhibit celebrates the enduring hardware ecosystem of the TI-99/4A family by highlighting how modern engineering breathes new life into classic architecture. Attendees will experience three unique systems bridging the gap between 1981 and today. The first system transforms the quintessential home computer experience. It features an original TI-99/4A console heavily enhanced with a JasonACT PiPEB sidecar and a Finalgrom99 cartridge for seamless software loading. The console is upgraded with a Pico9918 Video Display Processor for crystal-clear visuals and an MX-99 mechanical keyboard, offering an unparalleled tactile typing experience. The second build is a robust 99/22 system pushing the platform to its limits. This powerhouse utilizes a Shift838 IO Card and a PEB backplane fully loaded with a MegaRam expansion, an 838FDC floppy controller, a classic Speech Adapter, and a CADD Video Card, demonstrating the incredible expandability of the 99-series environment. Finally, the exhibit leaps forward with a custom, modern ATX motherboard design for the Power Basic Cortex system. Powered by the venerable 16-bit TMS9995 CPU, this build illustrates how retro processors integrate into modern form factors for contemporary development. Join us to explore the thriving hardware scene keeping this platform alive!
1
3
20
1,448
I have amazing enough been selected to be one of the many great retro tech guest speakers at the upcoming VCF Montreal v2.0 two-day event and on Sunday at 9am November 8th 2026, I will be giving a short 30 minute speech with time for Q&A afterwards. For more info on the event please check out this link: cvcfed.org/vcf-montreal-2-0/ Keeping the TI-99/4A Alive: Community, Modern Hardware, and the AI-Assisted Future Born in Montreal in 1969, Gary Bowser — known in the community as GaryOPA — is a hardware and software developer and digital design engineer with over four decades of experience in embedded hardware and low-level machine assembly. Through his companies Oasis Pensive Abacutors and OPA Phoenix Technologies, he builds modern solutions for classic systems: the Texas Instruments TI-99/4A above all, but also MSX, Colecovision/Adam and NABU. Now retired in Toronto and living with chronic lymphedema, he has turned his home into a working laboratory of late-'70s and early-'80s hardware, which he uses daily to develop and test new projects: memory cards, floppy controllers, homebrew cartridges, and the open-sourcing of his original commercial TI-99 software. He develops old-school on original hardware while leveraging modern AI tools and toolchains, hoping to bring a new generation to retro-computing.
4
8
1
46
1,265
Can't believe it is August already, soon it will be Fall here in Canada, and then snow for Christmas 2026. July was crazy month so much stuff finally coming together for me. March of Dimes approved my funding, so I was able to get my condo renovated, to make it better to move around by myself and be less depended on having a PSW everyday. I also got approved for my electric wheelchair and I had to spend a bunch of hard days rearranging my computer desks and making enough space to move around with my new racing neon green hot wheels. With my new hot wheels, I was finally able to go outside for a trip down the street to the corner store by myself, and buy a coffee and relax outside in the park, it was sure good to get outside on my own finally after 3 years, it really helps lift your mental state to be totally "free", (if no stairs). But there is still a lot of work ahead to get my overall health better, and continued push to get proper surgery to my left leg to reduce the lymphatic issues with the end goal to be able to walk by 2027, and not be forced to live out the many years I still have left in a wheelchair. The next test with my new hot wheels, is to see if I can keep my mind focused for longer periods of the day with less overall pain, if so that will be great help to continue my original love and passion in making new retro projects for the Texas Instruments TI-99/4A Home Computers, as before I could only get like at most 6 hours of day of sitting at desk working, before I needed to laydown for the rest of the day to recover. Thanks again everyone for your donations, prayers and good vibes, along with a special shout-out to the Tumblr community that has been very good in their support, hopefully I can now get back to posting more often on social media, now that I got my new hot wheels to ride around in, and take some nice videos to share of the outdoors in my little neck of the woods here in Canada before the snow comes later on this year. -=(GaryOPA)=-
6
2
2
39
2,208
Summer is finally here in Canada, at the start of July 2026, we had a few hot and humid days at over 90f / 33c which is a nice change from the colder and chilly Canadian months, it really makes me miss Dominican Republic where the weather is more stable and just right, not too hot and not too cold. I can't believe it's already been a full 3 years of freedom in Canada, and I am now 57 years old, how time flies, the first couple of years were really hard getting my life restarted, but now things are starting to flow through with getting my hospital bed earlier this year, and now the March of Dimes helping to fund renovations for my place so I can get around easier, and also later on this year I will finally be getting an electric wheelchair which will help me to get around better and travel outside to nearby stores. But there is still alot of work ahead to get my overall health better, and continued push to get proper surgery to my left leg to reduce the lymphatic issues with the goal to be able to walk more by 2027. Many thanks to everyone that has gathered together and helped promote my GoFundMe campaign during the last 3 years, it has really helped to get my life restarted and to get the things I needed for my health and safety. Every bit helps me towards improving my overall health and well-being, so please continue to help spread the word about my story and the rebuilding of my life, along with now my original love and passion in making new retro projects for the Texas Instruments Home Computers. My work on the TI99/4A console helps to keep my mind focused and healthy. I just wish I could spend more hours per day at it, but sadly I still need to rest like 12 to 16 hours a day because of my lymphedema left leg, otherwise I am in too much pain the next day. So the daily struggle is never over, I got to keep on pushing and moving forward, and staying positive and continue on the path of improving my health and overall well-being, like I have been doing over the last 3 years. Thanks again everyone for your donations, the Tumblr community has been good in their support and kind words, so all the best wishes to everyone there, and thanks again for all your kind messages, prayers and thoughts. -=(GaryOPA)=- gofund.me/a49c10df9
5
452
Gary Bowser retweeted
Replying to @Bowser_GaryOPA
@Bowser_GaryOPA, protagonista del caso de piratería de videojuegos más famoso del mundo, agradeció públicamente a El Testigo por el reportaje sobre su historia y su nueva vida en Canadá tras salir de prisión. Nuestro trabajo resumió el caso de Team Xecuter, su condena en EE. UU., la demanda multimillonaria de Nintendo y el proceso de reconstrucción de su vida.
2
3
22
841
My many thanks to @eltestigo_do from Dominican Republic 🇩🇴 for making a wonderful "news reel" 📰 about life's story and my restart of life in Canada 🇨🇦 after my federal custody. "Gary Bowser y el caso de piratería más infame del mundo"
Gary Bowser y el caso de piratería más infame del mundo Para más contenido como este, visita eltestigo.com/ #SeremosTestigo #noticias #garybowser
1
1
18
1,487
One Positive Step At A Time In Rebuilding My Life! Another goal post has been reached, last month ODS approved me getting an hospital bed and yesterday it was finally installed in my condo. This will greatly help my lymphedema in my left leg and for hopefully my surgery soon.
1
1
28
616
Thanks to everyone that sent me good thoughts and prayers for my 57th birthday yesterday. I spent it quietly with close family and friends, nothing special as it was a rainy and chilly day. Looking back at everything in my life recently, it's been one dynamic adventure, and I am lucky to have some caring friends and to be able to continue my love and passion for the Texas Instruments TI99 Computers. My restarting journey is not over yet, still lots to get done in improving my health and overall wellness, but I think we made some good progress during the 3 years I have now been back in Canada with my freedom. Looking forward to having many more birthdays and to continue on life's adventure and making new friends.
11
465
May 2026 has finally arrived, but it's still a bit on the chilly side, hopefully when my birthday comes up on the 12th, the weather will be nice to have an outdoor party in the park like I did last year. Looking forward to my 56th birthday as it will mark basically the end of my 3rd year of freedom and also the end of my federal probation, so I will be even able to enjoy more Canadian freedom and independence. Many thanks to everyone that gathered together and promoted my GoFundMe campaign during April to reach the $25k goal milestone before my birthday. Every bit helps me towards improving my overall health and well-being, so please continue to help spread the word about my story and rebuilding of my life. April was a crazy busy month in getting things on track for improving my health and quality of life, soon I will be receiving a custom powered wheelchair finally, and also a proper hospital bed, and some more renovations to my condo as well to make it easier for me to get around and live by myself with less stress. But the struggle is never over, I got to keep on pushing and moving forward, and staying positive and continue on the path of improving my health and overall well-being, so I can focus my mind more on various retro projects for the Texas Instruments hobbyist community that have also been supportive during the last 3 years Thanks again everyone for your donations, the Tumblr community has been good in their support and kind words, so all the best wishes to everyone there, and thanks again for all your kind messages, prayers and thoughts. -=(GaryOPA)=- P.S. The above photo is an AI mockup of me sitting in the park with my new wheelchair for my birthday, looking forward to taking a real photo of myself during that happy birthday celebration event coming up in 12 days.
2
8
623
Sun Is Shining On GaryOPA Upgraded Workshop May is almost here. Sunny Spring Days have finally started in Canada. And here at OPA headquarters, we have completed some much needed upgrades to our little workshop packed away in the very sunny Den of my condo in Scarberia. It's going to be a learning curve for me as I am going to start assembling soon a bunch of FinalGrom99 cartridges for our beloved TI99 retro computer community, but I have never done tiny SMT soldering before, but I think I have got all the required equipment now installed, like microscope, hot plate & stencil. Any tips or advice from fellow hobbyists that have done SMT work is much appreciated, as I am a total noobie in this field. Thanks again for all the support and encouragement recently.
3
1
12
489
Lots of small things have been happening in April to make my daily life a bit easier. My ODSP caseworker finally approved for me to have an emergency toilet thingy and with recent donations to my GoFundMe allow me to get an affordable mini-fridge. So I have now, rearranged my tiny but cute bedroom area and even hooked up an Atari 7800+ console to my 32" TV. Along with a small movable table for my old laptop, this will allow me to relax, but still do some online work on those bad days I can't even get out of my bed due to my lymphedema in my left leg giving me too much pain. Having the toilet now next to my bed reminds me a bit like my tiny old prison cell that I spent 40 months in, but I am blessed to be just over a month away from 3 years of Canadian freedom and I am very much looking forward to my 56th birthday soon along with warmer spring days in May. Thanks all for your prayers & thoughts!
2
1
11
394
March is just flying by, soon it will be April showers that bring May flowers. Finally, this month in the progress of making my daily life easier, I was able to have grab bars installed, along with an new shower bench in my bathroom. Thanks everyone for your prayers & thoughts!
2
6
319
Bowser Wishes Everyone A Happy Mar10 Day! Its been a while since my last social media post, time is just flying by, I can't believe we are already into 3rd month of year 2026, anyway on this nice and warm Mario day, I like to give everyone a progress update on my overall health and what's been happening recently. I now have a PSW coming 3 times a week to help me with daily chores like showers, laundry, etc. And a nurse coming twice a week to wrap my leg with compression bandages in the hope it will slowly help to reduce it. I also now have fresh meal coming each day for launch, and weekly a box of frozen meals for my dinner, here hoping after a few months on this diet I will lose at least 100 pounds and get down to around 250 at least, it is tough getting used to it, but at least its all covered between United Way and my "disability benefits", so that will save me money at least each month on groceries, I only need to buy food for my Sunday's. I also finished all my doctor's appointments over the last month which I was keeping me busy, no more until early April, so now hopefully I can catch up on some Texas Instruments retro projects for my beloved TI-99/4a Home Computer that I been working on recently. Other good news, is with the recently appointments and at home visit by my OT, I have gotten the paperwork started and approvals coming down the line for various things I need to make my life easier, for one there going to be an "custom power wheelchair" delivered by March 26th, and also March of Dimes is working on giving me "home renovation" grant so I can make things better, like adding a ramp in my backyard, and making my bathroom door wider, and installing a tub with cut-out in it, that should all occur sometime in April. My ODSP caseworker has also passed along other requests from my OT for things like a new shower chair, and recliner to rest my legs on when relaxing, and medical bed as well which should help my legs when sleeping. Its been a tough road, but finally I am starting to see some good progress being made via the Canadian healthcare system, it has taken a while since I been back in Canada since June 2023, so we are coming up to the 3 year mark, but now that the wheels have started moving, many things are happening all at once. Looking forward to the warmer weather that started last weekend, but sadly this week we might have a little blast of snow again, but soon it will be April, and then coming up in May my birthday, and I think by then everything I mentioned above and more will have been put in place, so looking forward to having a great one! And thanks for all the positive thoughts and prayers!
4
13
702
It's time for progress report on the 838-FDC... Currently, getting back into the flow of some major coding to finalize things up, as many of you know I had some health issues last month, but I am back on track, and getting to regular schedule of daily coding and testing now. All the issues with FPGA replacement for WD1772 been resolved, everything is running smoothly now on TI99 system with formatting, reading, writing floppy diskettes in both 5.25" and 3.5" on various physical and gotek drives. Work now is on verifying that "high-density" 1.44mb can be fully supported on the TI99, I been hard at work on writing some very compact and tight assembly code to all fit within the 256 bytes of scratchpad, as we need as much speed as possible on the /4A to transfer 36 sectors of data per track. What I am doing now is writing more test programs, and then comparing results between the 838-FDC and a Geneve with HFDC (which is currently the only other controller that can handle 1.44mb diskettes), but only on Geneve! I hope to post up video later on this weekend, showing the test program, reading a physical 1.44mb diskette that been filled up with data on Geneve first, on a /4A and without any errors or other issues. Next step after that is to do the opposite fill up a new diskette with bunch of files on the /4A and then read/compare the data back on Geneve to have it again without any errors or other issues. Once those two steps have been done by me and verified by Shift838 as well on couple of different systems and setups, then we will be opening up pre-orders for the card. It also has been decided to leave the hardware design with SMT as-is, without reducing it more, I was looking at possible changes to reduce the amount of parts, but that would add more work for end-user, as it would require modding your drives to support auto-switching, as not all drives output the density signal on pin 2, and also it would remove the option of using an existing Ajax chip or regular WD1772 chip, forcing the card to only use the FPGA, and not everyone "cost-wise" and for other reasons might want that. That's all for now, will be updating and posting more updates on regular basis now, that I got my routine done health-wise, with my new diet, and 3 PSW visits per week, and 2 nurses per week. One step at a time, and staying positive and moving forward! In the meantime, Shift838 and I have a bunch of other cool projects in the works, so stay tuned to his channel for more great TI99/Geneve news in the coming weeks and months!
1
19
814