🥚F3NIX (@F3NIX1816) header
🥚F3NIX (@F3NIX1816) profile picture
Joined September 2021
Photo by 🥚F3NIX (@F3NIX1816)Photo by 🥚F3NIX (@F3NIX1816)Photo by 🥚F3NIX (@F3NIX1816)Photo by 🥚F3NIX (@F3NIX1816)Photo by 🥚F3NIX (@F3NIX1816)Photo by 🥚F3NIX (@F3NIX1816)Photo by 🥚F3NIX (@F3NIX1816)Photo by 🥚F3NIX (@F3NIX1816)Photo by 🥚F3NIX (@F3NIX1816)Photo by 🥚F3NIX (@F3NIX1816)
🥚F3NIX retweeted
Who has two Genesis Frog NFTs and wants to join the exodus? I need to get the scholarship decision process up and running.
33
25
115
4,005
🥚F3NIX retweeted
Running a single-chip miner and wondering what's next? The NerdQX 8TH is your step up. 4 × BM1370 chips. 6TH/s stock, 8TH/s overclocked. better solo lottery odds than your Bitaxe — and it looks incredible doing it. Here's why we built it differently 🧵
11
19
2
102
3,717
Q1 Wen Hen Updates hen-house.gitbook.io/q1-2026… Execution, scale, and tokenomics! Vera, Acelera, and Calix form the backbone of the FarmlandFi growth engine. 🎤🫳
14
28
4
72
2,338
🥚F3NIX retweeted
Quick update for the Frogs of @ThePlagueNFT 1⃣New Discord is live. I will start accelerating the vouches soon. Working through some of the bugs and the process. I have never seen so many people want to get into Discord :) Our goal is to create "clean" channel where our community can gather and not have to deal with the transients or daily shills we all get in this space. 2⃣ Exodus is moving along nicely. Over 4,000 Genesis Frogs burned so far, with a little over 1,100 new Exodus Frogs created. Elder selection process will start to be communicated next wee. 3⃣ The animation process is moving slower than I would like. I will have a more solid update on this by next week. --------------------------------- I believe this bear market will kill the majority of the remaining NFT brands. I do not believe that NFTs are dead. But certainly the NFT market as we knew it has been dead for a while. What we have left are some zombie brands, propped up by a few people hoping their bags will pump on more time. That being said, I do believe there are a good number of NFT communities (including the Frogs) that have a real opportunity to mold the industry into something meaningful. But I am sure half the comments will tell me dumb and "washed" I am.
53
29
1
192
5,296
🥚F3NIX retweeted
🚀 NERDAXE GAMMA GIVEAWAY 🚀 We’re giving away a Nerdaxe Gamma featuring our premium Copper El Mirage Heatsink! Worldwide shipping on us 📦 How to enter: 1️⃣ Follow us 2️⃣ Like this post 3️⃣ Retweet this post 💡 The New Standard We are officially moving the needle. All Bitaxe and Nerdaxe Gamma units moving forward will now ship with the Copper El Mirage Heatsink as standard. Superior thermal performance, right out of the box. 🛒 Available now on our site! Link in comments
191
504
12
626
24,528
Canna Sapiens turns 1 today. 🎉 Thank you for showing up, creating, and believing. Year 2 starts now. Let’s make it special. Join us for our Birthday Space at 11AM EST. 👇
42
31
14
113
10,882
No empty promises, I can confirm the dedication of the @IxTechCrypto team! Keep doing what you’re doing! I very much appreciate your effort and your products. And to the plebs, get yourself a QX if you don’t have one already 🤪🤪🤪
At Ix Tech, our commitment doesn't end with your purchase. We've sent an email offering to upgrade all the NerdQX batch 1 owners offering to upgrade your fans to the new batch 2 standard! Just cover the shipping. It's our way of making sure you're always part of the latest innovation. 🤝
2
59
🥚F3NIX retweeted
5m folks......you ready?
22
13
108
3,536
Here we go, stable release 1.0.36 Nerd*OS. 🥳 github.com/shufps/ESP-Miner-…
The next update of Nerd*OS could go down in history as the biggest feature and bug fix massacre in Nerd*history ever. Take a look at the wonderful long list of changelog, all these cool new features and bug fixes... I marked the least important feature with an arrow... so that no one overlooks it. Oh, and you can download the logs now... sometimes the world can be so simple. Oh, and RC1 is out... testing and feedback are welcome... 🙃
1
1
6
813
I checked Google Maps and accidentally witnessed a stealth mint 👀 Reveal #1: empty land Reveal #2: 2 coops fully rendered No Thread 🧵 No Hype Just Execution I see you, @_HenHouseNFT 🐔🗺️
18
22
1
68
1,842
Merry Christmas, Hempinooos! 🎅💚
29
9
1
80
1,798
🥚F3NIX retweeted
Long-term overclocking update following up on my previous post: The test ran for 18 hours (24 hours wasn’t possible due to scheduling), and I deliberately do not leave a heavily overclocked system unattended. ⚠️ Important warning: Do NOT try this yourself. You can damage or destroy your miner, and in the worst case even cause a fire 🔥🧯 This water-cooled setup has massive thermal headroom that is not realistically achievable with air cooling, especially in the VREG area. After the 20A fuse died at 875 MHz / 1325 mV (14.2 TH/s), I switched to a 25A fuse, which held without any issues for the remainder of the test. 🎯 Goal: 1000 MHz ❌ Result: 950 MHz Unfortunately, I had no luck in the silicon lottery — my ASICs simply aren’t the most capable ones. Since there are no reliable reference values for a #OCTAXE with 4 phases and a 1/1 oz PCB, this required very careful step-by-step testing to avoid killing the board. 🚀 Maximum stable setting: 950 MHz / 1330 mV → 15.4 TH/s Beyond ~1400 mV, the risk felt unjustifiable — so common sense won. This setting ran for ~2 hours to evaluate both the cooling system and my #COOLAXE TYP-OCT4V. @Marsmensch made a very valid point: numbers are meaningless without long-term stability. Challenge accepted. My goal has never been flashy screenshots, but real, reproducible results. ❄️ I deliberately stressed the cooling system: Pumps and fans were reduced step-by-step from 100% down to 1%. Pumps ran at ~500–550 rpm, Noctua NF-A20 fans (with NA-RC7 low-noise adapters) at ~200–350 rpm. The setup sits in my living room, windows closed — not in a cold basement. 😉 📊 Results after 18 hours @ 950 MHz / 1330 mV: • Hashrate: 15.4 TH/s • Power (firmware): 344–346 W • At the wall: 388–408 W • ASIC temp: 50–51.2 °C • VREG temp: ~30 °C • Cooling: 30–35 l/h • 29.8 °C water temp •26.7 µS/cm conductivity As hashrate increased, rejects increased as well, requiring adjustments to VR frequency — still some room for optimization here, suggestions welcome. Pool reality: on my local pool I repeatedly saw 17.5–18 TH/s (not logged). I can repeat the test with proper logging if needed. ❓ How much cooling headroom is really left? After 18 hours at 1% cooling, I ramped the cooling to 100% and compared after 15 minutes: • Hashrate: 15.2 TH/s • Power (firmware): 339.5 W • At the wall: 382 W • ASIC temp: 42.3 °C • VREG temp: 25.4 °C • Cooling: 232.5 l/h • 22.5 °C water temp • 27.3 µS/cm conductivity Please do not try this yourself! Huge thanks to @trendkraft for the constant exchange and @Marsmensch for pushing me to do the long-term test. #COOLAXE 🧊❄️ Built with passion, curiosity, and many sleepless nights.
3
2
2
15
2,032
🥚F3NIX retweeted
The system is up and running — and it’s performing fantastically. 🧊❄️ After a proper learning phase and dialing in pumps and fans, I finally pushed into overclocking territory. Huge thanks to @trendkraft for providing a custom firmware that lifts the 200 W limit 🫶 We’re now running at 850 MHz, and there’s still plenty of thermal headroom left — with pumps and fans at just 5% load. Yes, five. 😎 Right now, the only bottleneck is the Meanwell LRS-350, already pushing around 290 W. But… psst 🤫 a stronger PSU is already on its way. That’s when things get really interesting. 🔥 Take a look at the stats in the screenshots yourself. For more detailed information, as well as numbers, data, and facts, make sure to check out @trendkraft, as always. Now imagine what could be possible with an #OCTAXE 6-phase by @BitMaker_ or a #NerdQX by @IxTechCrypto once I get my hands on one… 🤔 #COOLAXE 🧊❄️ Built with passion, curiosity, and many sleepless nights.
12
3
2
48
6,079
Think you've seen it all? Air cooling, OC, high hash rate, silent system - if you want something more, you invest in an AiO. Well, I can guarantee you've never seen THIS before (neither have I). If there were 10 levels of escalation, this would be level 21. Easy, you think, just an AiO and then there's... But no, Xeve has taken it to the craziest level I've ever seen. He's already written a few things about it himself, but I'd like to add a few lines. It's a Nerd OCTAXE Gamma, Revision 2.2 with 4 phases. I'm not sure, but I think it's a 1oz/1oz or @CoSatoshi821 ? We've all known for a long time that ASIC cooling is no problem, but since the Supra, VREGs have been the devil's work, which you want to keep as cool as possible. Xeve thought, no problem, shrouds or fans are boring. I'll just design a custom water block that is printed entirely from copper using the SLS process. That alone is crazy enough... But it goes even further. It's not just a small water cooling system with a 360 radiator and three fans, it's a monster... in the truest sense of the word. The world-famous MoRa from @alphacool, in the largest version currently available. Powered by 9 200mm Noctua fans. Incidentally, this is a German company that is known worldwide for its water cooling systems, which make the hearts of every enthusiast beat faster. The problem was that the cooling was too good, so all these fans had to be throttled with a 5V adapter to bring them down to about 5% RPM... And thus are ABSOLUTELY silent. The whole thing is powered by 3 DS pumps, because water needs to be moved. You might think, no problem, I've seen that before... I can guarantee you haven't seen it in a home mining project. Compared to the MoRa, the Nerd*OCT looks like an ant... But see for yourself. Unfortunately, the whole setup now slows down the MW LRS 350 12. At 800 MHz, you already measure >290W at the power outlet. So we definitely need a more powerful PSU here, which has already been ordered. Since I myself have no idea where we would end up with OC here... apart from the technically specified components. We still have an incredible amount of headroom in terms of thermal performance, as the entire MoRa system is not being utilized to its full capacity. This is really one of those pleb-pleb projects that are so crazy and unique that I can hardly believe it myself. But see for yourself...
The system is up and running — and it’s performing fantastically. 🧊❄️ After a proper learning phase and dialing in pumps and fans, I finally pushed into overclocking territory. Huge thanks to @trendkraft for providing a custom firmware that lifts the 200 W limit 🫶 We’re now running at 850 MHz, and there’s still plenty of thermal headroom left — with pumps and fans at just 5% load. Yes, five. 😎 Right now, the only bottleneck is the Meanwell LRS-350, already pushing around 290 W. But… psst 🤫 a stronger PSU is already on its way. That’s when things get really interesting. 🔥 Take a look at the stats in the screenshots yourself. For more detailed information, as well as numbers, data, and facts, make sure to check out @trendkraft, as always. Now imagine what could be possible with an #OCTAXE 6-phase by @BitMaker_ or a #NerdQX by @IxTechCrypto once I get my hands on one… 🤔 #COOLAXE 🧊❄️ Built with passion, curiosity, and many sleepless nights.
9
7
2
55
4,485
Finally got my LRS350 ready to release the full potential of the #NerdQX. The Noctua A12x25 G2 clearly limits the NerdQX at 9.5TH at normal room temperature. The @IxTechCrypto guys took the right choice with the Bequiet fan, got the 10TH. What a damn beast!!! 😍🤪 @trendkraft
3
1
13
622
Farmland.fi is finally live So many moving pieces web2 ↔️ web3 "Quiet progress today prevents loud failures tomorrow."
24
22
4
49
1,177
I’ll miss my cigar, but got a very nice exodus frog! Smooth process, nice experience 😃🐸 @ThePlagueNFT @the_pons
1
14
129