FLiET retweeted
Got some new circuits, we'll run it up once again till we eventually get it right
Won't be using it directly, we'll go smaller first 🤧
First propulsion test for fliet failed... the circuit fried then caught fire that's about $1k+ gone
Been exploring t-motor V505 lift motors and an AT8025 rear with flame 60A and AT195A HV controllers as part of the proposed setup.
The test was actually meant to help us work towards flight stability but now we have a burnt circuit, tho we've done some replacements but we can't test again just yet until we figure out the root cause.
We're suspecting that the setup pulled more current than part of the power system could handle. We could not find a simulation environment that matches our particular design, similar aircraft exist, but we haven’t found a ready made setup that represents ours properly.
The loss is painful sha but we’ll figure it out.
Talk soon.
FLiET retweeted
First propulsion test for fliet failed... the circuit fried then caught fire that's about $1k+ gone
Been exploring t-motor V505 lift motors and an AT8025 rear with flame 60A and AT195A HV controllers as part of the proposed setup.
The test was actually meant to help us work towards flight stability but now we have a burnt circuit, tho we've done some replacements but we can't test again just yet until we figure out the root cause.
We're suspecting that the setup pulled more current than part of the power system could handle. We could not find a simulation environment that matches our particular design, similar aircraft exist, but we haven’t found a ready made setup that represents ours properly.
The loss is painful sha but we’ll figure it out.
Talk soon.




