IMD555 10/06 健診 retweeted
Tektronix unveils low cost scope with 12-bit ADC and built-in Bode plots
blog.adafruit.com/2026/11/09…
IMD555 10/06 健診 retweeted
北海道大学も宿舎跡地を一般定期借地権設定して最大で2100年まで70年間貸付に出す見込みなので恐らく数年以内に大学保有地にタワーマンションか何かが建つと思います。▼東京科学大保有地にマンション・商業施設など…野村不が始動、大規模開発プロジェクトの全容 |newswitch.jp/p/50727
IMD555 10/06 健診 retweeted
Mixed-diameter nozzle printing is coming to H2D, H2C, and X2D.
You'll be able to combine different nozzle sizes in a single print, balancing speed and detail — the same feature we built for H3C.
Each of these printers has a different AMS setup, so the slicing logic and print parameters need to be adapted model by model. Printers with a filament track switch will take a bit longer.
For more details: blog.bambulab.com/h2d-h2c-an…
IMD555 10/06 健診 retweeted
異径ノズル併用がH2Cにも来るのは確定っぽい…それは嬉しい!
H3Cに対してのH2Cの優位性は、 同じフィラメントを複数ノズル径で使い分け出来る点か。
「9 個の固定ペア」だとそれぞれ用意しなきゃならないが
H2Cは「フィラメントとノズルを自由に組み合わせできる」のが強みになるのか。
悪くないぞ!
I want the @BambulabGlobal H3C, but after going over everything, it seems like the H2C that we have is better for how we print and the H3C looses a useful feature... Hmmm
IMD555 10/06 健診 retweeted
H3C安すぎない?と思ったけど、
今回のAMSには自動巻き戻し機能がないのね。
A1miniの外部スプールみたいに手動でアンロードが必要…9本あると地味に大変かも?
PLA印刷の後、チャンバーが高温になる素材を使う時はPrintTool内でPLAが溶けるのを防ぐ為、全部手動でアンロードが必要になるわけか。
IMD555 10/06 健診 retweeted
H3C発表。ツールチェンジャーは「ゲームチェンジャー」か?|P lab co.,ltd.ウチダケイ/ポラ note.com/p_modellabo/n/n4a79…
H3Cの発表、H2DやH2C、X2Dを持ってる人にも関係ある話がありました。
Bambu Studioの異径ノズル対応、順番に来るらしい。
H3Cの中身と、誰向けなんかをまとめてます。
#3Dプリンター
#3Dプリンタ
#3Dプリンター買え
IMD555 10/06 健診 retweeted
ANAからの回答
・樹脂製ボックスと布製バッグに加え、フレームへのタオル補強程度では不十分
・強い摩擦が継続する事にも耐えれるケース・補強が必要
カーボンがここまで削れるのに耐えれるケースって何だ?厚さ2cmの金属板の箱でも造れと言うのか??
箱だけで何10kgだよ🤣
これで一方的に今後の回答は打ち切るとのことだけど、弁護士とか依頼しても請求は不可能(もしくは割に合わない)ものなんですかね??
IMD555 10/06 健診 retweeted
OrcaSlicer 2.5.0 alpha版リリース。H2Cでも異径ノズル?|note.com/p_modellabo/n/n18a6…
OrcaSlicer 2.5.0 Alphaがリリース。
ついにH2C対応!さらにH2D・X2Dでは異径ノズルにも対応。と思ったら、H2Cでも異径ノズルを使った造形報告がw
新機能だけでなく、Bambu Studioとの関係や、何かと揉めてるオープンソース周りの話も調べてnoteにまとめました。
先日から色々と盛り上がってきたなあ
※まだAlpha版なのでご注意を。
IMD555 10/06 健診 retweeted
The AMS-3H looks really interesting, to me it looks like one of the slots can handle a larger spool of filament, if they use only 9 colors that slot could work for 2 small or 1 large spool. Looks like it would also fit very nicely onto the top of the machine, avoiding the cables for the front mounted tools. Very clean design and I want to see others working on a similar solution.
Note, these are just patents, not final products.
Everything I know about the Bambu Lab H3C so far!
Bambu has officially started teasing the H3C, and it looks like we're finally getting a proper tool changer from them!
The biggest thing is that we're getting 9 tools, all mounted across the front of the printer, similar to the approach INDX is taking. Each position has its own filament feed and what appears to be an individual status LED. I really like this arrangement since it should make accessing and maintaining the tools much easier.
What's particularly interesting is how Bambu is handling the actual tool changing. Based on their patents, it looks like the system may use a shared extruder mechanism with interchangeable hotend assemblies, rather than nine complete extruders. This could keep the individual tools relatively lightweight while allowing each filament to remain loaded.
If that's the case, it could solve one of my biggest complaints with the H2C, which is the extra time spent unloading and loading filament during swaps. I'm really curious how quickly the H3C will be able to change tools, especially compared to systems like INDX and the Snapmaker U1.
I've been involved with tool changers ever since StealthChanger, so I'm particularly interested in the mechanical design, docking mechanism, tool alignment, and how Bambu plans to handle reliability over thousands of swaps. Having experience with these systems makes me appreciate just how much goes into making a tool changer work consistently.
There's still a lot we don't know, including the price, build volume, actual swap times, and whether the nine tools are the total or if there's an additional tool on the carriage (9+1).
Bambu has confirmed the official reveal for November 3 at 9 AM EST, so we should have answers pretty soon!
I'm excited about this one. If Bambu can bring the same ease of use and reliability that their existing printers are known for to a proper tool changer, I think this could be a really big deal for 3D printing.
What do you think?
IMD555 10/06 健診 retweeted
日経、個人情報183万件漏洩 不正アクセスで
nikkei.com/article/DGXZQOUD1…
IMD555 10/06 健診 retweeted
OrcaSlicer 2.5.0のアルファ版が公開👀
リリースノートが永遠に終わらないくらいアップデートされてるぞ...
◉40種類以上の内蔵テクスチャや画像から表面に凹凸・色を付けるテクスチャディスプレイスメント
◉Bambu Lab H2D/X2Dの異径ノズル対応
あたりは試してみたい🔍️
orcaslicer.com/wiki/releases…
#3Dプリンター
OrcaSlicer V2.5.0 Alpha is here 🐋
This is the most feature-packed release in OrcaSlicer's history: more than 950 pull requests from over 140 contributors.
🧩 Python plugins: extend the slicer without maintaining a fork, and share your plugins on Orca Cloud
🧱 Texture Displacement: stamp real, printable 3D texture onto any surface
🎨 Color mixing: blend new colors from the filaments you already have loaded
🏭 Belt printing: conveyor "infinite Z" printers, sliced natively
👯 IDEX & IQEX parallel printing: two to four parts at once
✏️ Design tab: a parametric CAD workspace inside the slicer (early preview)
⚡ Speed Dial: press Space, run anything
Plus Tool-changing algorithm improvements, precise Seam modifiers, startup in about half the time, slicing ~35% faster, and hundreds of fixes.
It's an alpha, so some of this is experimental. Back up the projects you care about.
Full release notes: orcaslicer.com/wiki/releases…
IMD555 10/06 健診 retweeted
アメリカ、ESP32は事実上輸入できないことになったとか。すんげえ面倒なことになっているみたい。
reddit.com/r/esp32/comments/…
IMD555 10/06 健診 retweeted
セキュリティソフトを手がけていると言わずに年賀状ソフトを手がけると言ってあげる優しいNHK
【NHKニュース速報】
年賀状ソフトなど手がけるソースネクスト 顧客情報2251万件が漏えいの可能性(19:22)
#nhk_news news.web.nhk/newsweb
IMD555 10/06 健診 retweeted
Should you cut a hole in the ground plane under the pads of a USB-C or HDMI connector? Some engineers swear by it, others say never.
I simulated it 327 times to settle it.
Answer: yes, when the pad is wider than the trace. And make the hole exactly the size of the pads. 🧵1/12
IMD555 10/06 健診 retweeted
米特許庁、Bambu Labに侵害評決が出た特許2件の請求項を無効と判断 fabscene.com/new/news/ptab-b…










































