Alan retweeted
Issued by the FAA just moments ago, ALL US airports are currently ground stopped. This means NO flights may depart for US airports. Flights already in the air will be allowed to land. This is related to an FAA equipment outage.

ALT DUE TO EXTRAORDINARY CIRCUMSTANCES AND FOR REASONS OF SAFETY. ATTENTION ALL AIRCRAFT OPERATORS, BY ORDER OF THE FEDERAL AVIATION COMMAND CENTER ALL AIRPORTS ARE GROUND STOPPED. ALL DEPARTING TRAFFIC SHOULD REMAIN GROUND STOPPED UNTIL FURTHER NOTICE. INBOUND INTERNATIONAL FLIGHTS WILL BE MANAGED ON A CASE BY CASE BASIS.
Alan retweeted
IYKYK
#opensource #autonomy
Alan retweeted
Extreme RFI at my QTH made local RX almost impossible.
Internet-based reception was my only option, so I built HamRxBridge to receive via KiwiSDR or WebSDR while using my own rig for TX. Its in its final testing phase.
Alan retweeted
📢Announcing #FreeCAD Design for Manufacturing (DFM) Workbench minor release v0.2.0
More testers needed to help improve this important workbench. See the release notes for details.
github.com/ryankembrey/FreeC…
Alan retweeted
Replying to @latimeralder
BREAKING: after only 30 years of colossal public investment in renewables, UK citizens are already being asked to buy lots of tins of chicken soup.
writeup coming up on rooting your samsung tv (running tizen) is coming.
everything about the methodology will be included (in 2 tiers of explanation: one technical, one intended as a way to enable as many people to do it themselves).
your room should be yours. companies who yearn for every extractable data vector of your life should be shamed.
on the bright side, now that we’re going to be freeing up their data centers from needing massive telemetry ingest capacity they can get back to making memory more affordable as an apology. :)
Alan retweeted
My enthusiasm for radio is slowly returning after illness last year…& current interest is getting my ka9q-radio setup back online. Making progress with new loft based location for the radio & gear (ie. no longer in a bedroom, in full view of my wife’s critical eye…😁)
Alan retweeted
This video provides some insight into whether Open CAD Studio can replace AutoCAD in production work. I share my own experience using Open CAD Studio.
#OpenCADStudio is a free open-source native DWG authoring tool.
Check out the video: youtu.be/Go4yXic_QhU
#SPBProdcution
Alan retweeted
Open CAD Studio supports some dynamic block functionality, even though you can not create dynamic blocks in it.
#OpenCADStudio is a free, open-source DWG authoring tool developed under the OpenAEC Foundation umbrella. Check it out at: opencadstudio.com/
#SPBProduction
Alan retweeted
#CADCraft is a free, open-source DWG editor created by #Artcraft. It is still in heavy development, but I took a first look at it in this video:
youtu.be/j8yC0dBmm2I
#SPBProduction
Alan retweeted
KiCad Version 10.0.7 Released
The KiCad project is proud to announce the latest version 10 bug fix release. See the blog post on the KiCad website for more information about this release.
kicad.org/blog/2026/10/KiCad…
Alan retweeted
Open CAD Studio 2026.39 added a new external reference clipping feature.
#OpenCADStudio is a free, open source native #DWG authoring tool. Check it out here: opencadstudio.com/
RFspice – Online SPICE Circuit Simulator with Schematic Capture
rfconsult.uk/rfs/
More Professional RF, Microwave & Satellite Engineering Toolkit
Browser-based design and analysis tools for RF systems, high-frequency circuits, radio propagation and satellite communications
rfconsult.uk/
Alan retweeted
For all #Linux users: Open CAD Studio is now available on #FlatPark, a community-run repository hub for Linux desktop applications packaged using Flatpak. Check it out here:
flatpark.org/apps/io.github.…
#OpenCADStudio
"Within a few weeks we can expect it to reach 10m on a regular basis, perhaps bringing transatlantic QSOs to 28MHz once again."
Read this week's propagation report in full by visiting: rsgb.org/main/gb2rs/propagat…
#amateurradio #hamr #RadioPropagation
Alan retweeted
Open CAD Studio 2026.38 comes with first implementation of parametric modeling tools.
Open CAD Studio is a free, open-source native #DWG authoring tool for Windows, Mac, and Linux. You can check it out here:
open-aec.com/open-cad-studio…
#OpenCADStudio #SPBProdcution
Alan retweeted
New project started again, one by one, endless....
This one is a 3S 18650 battery pack for QRP radio operation.
I would like to build a compact rechargeable battery pack that can provide a practical field power source for small HF/VHF QRP radios. The pack uses three 18650 lithium cells in series, giving a full-charge voltage of about 12.6 V, which matches the external DC input range of many portable radios.
The target output is 12.6 V / 5 A max, enough for most QRP transceivers during receive and moderate-power transmit operation. It is intended for radios such as FT-817/818-style portable rigs, IC-705-type setups with suitable input limits, small CW transceivers, and other field radios that can accept a 3S lithium pack voltage.
The board includes the battery holder, protection circuit, charging input, power switching, status indication, and output connector area in one module. T
Main design goals:
- 3S 18650 battery pack
- 12.6 V fully charged output
- 5 A maximum output target
- Suitable for QRP radio field operation
- Built-in protection and charging circuit
- Compact PCB module
- Clear power and charge indicators
- Practical output connector for radio useNew project started again, one by one, endless....
This one is a 3S 18650 battery pack for QRP radio operation.
I would like to build a compact rechargeable battery pack that can provide a practical field power source for small HF/VHF QRP radios. The pack uses three 18650 lithium cells in series, giving a full-charge voltage of about 12.6 V, which matches the external DC input range of many portable radios.
The target output is 12.6 V / 5 A max, enough for most QRP transceivers during receive and moderate-power transmit operation. It is intended for radios such as FT-817/818-style portable rigs, IC-705-type setups with suitable input limits, small CW transceivers, and other field radios that can accept a 3S lithium pack voltage.
The board includes the battery holder, protection circuit, charging input, power switching, status indication, and output connector area in one module. T
Main design goals:New project started again, one by one, endless....
This one is a 3S 18650 battery pack for QRP radio operation.
I would like to build a compact rechargeable battery pack that can provide a practical field power source for small HF/VHF QRP radios. The pack uses three 18650 lithium cells in series, giving a full-charge voltage of about 12.6 V, which matches the external DC input range of many portable radios.
The target output is 12.6 V / 5 A max, enough for most QRP transceivers during receive and moderate-power transmit operation. It is intended for radios such as FT-817/818-style portable rigs, IC-705-type setups with suitable input limits, small CW transceivers, and other field radios that can accept a 3S lithium pack voltage.
The board includes the battery holder, protection circuit, charging input, power switching, status indication, and output connector area in one module.
Main design goals:
- 3S 18650 battery pack
- 12.6 V fully charged output
- 5 A maximum output target
- Suitable for QRP radio field operation
- Built-in protection and charging circuit
- Compact PCB module
- Clear power and charge indicators
- Practical output connector for radio use
- 3S 18650 battery pack
- 12.6 V fully charged output
- 5 A maximum output target
- Suitable for QRP radio field operation
- Built-in protection and charging circuit
- Compact PCB module
- Clear power and charge indicators
- Practical output connector for radio use































