NWK/野分機械 (@RoboSafs01075) header
NWK/野分機械 (@RoboSafs01075) profile picture

夢見た空想のロボを、現実に。 制御・構造・デザインを一体として考える個人ヒューマノイドロボッ卜製作者。 ロマンの追求。 | https://teapawt.org/t.co/ErjtxfPSRw | https://teapawt.org/t.co/moEltFsdFd #ホビロボ制御 #Sim2Real ※発言は所属と無関係

日本のどこか
Joined October 2021
Photo by NWK/野分機械 (@RoboSafs01075)Photo by NWK/野分機械 (@RoboSafs01075)Photo by NWK/野分機械 (@RoboSafs01075)Photo by NWK/野分機械 (@RoboSafs01075)Photo by NWK/野分機械 (@RoboSafs01075)Photo by NWK/野分機械 (@RoboSafs01075)Photo by NWK/野分機械 (@RoboSafs01075)Photo by NWK/野分機械 (@RoboSafs01075)Photo by NWK/野分機械 (@RoboSafs01075)Photo by NWK/野分機械 (@RoboSafs01075)
歩行デモと振り子pushデモの様子(その2) やはり今日は昨日より確実に性能の再現性があった!非常に良かった あと、操縦体験だけでなく、振り子使ってpush体験してもらうのもこのロボットの魅力を伝えられるアクティビティになるかもしれない #ホビロボ制御 #Sim2Real #NT東京2026
1
5
1
39
2,194
すご! めちゃいいなこれ。。。
iPadにコントローラーを接続すると、iPadの画面上でミニカーを走らせて遊べるようになっています!なんでも走らせてみてね!
194
BNO055からLSM6DSV16Xへの乗り換えを検討 MicroDuckの実績もあるのと、カタログ値もこちらのがよさげ
9
463
速く歩けるようになってきました! DSP比率の低減と歩行周期の短縮によって、歩行速度が向上しています。 #Sim2Real #ホビロボ制御
5
26
979
RLで新しいこと試すとき、初期値として適当なポリシーから追加学習するほうが収束が手っ取り早いので 都度最新の実機搭載ポリシーを基準に追加学習をさせているのだが 気づいたら現在の最新ポリシーの総iterが100000超えていたのでびっくり
2
297
NWK/野分機械 retweeted
❗ JUST IN: Boston Dynamics just put wheels on Atlas. And the result is pretty incredible! 🤖 Instead of walking, the humanoid can now roll, turn, slide sideways, and even perform a 360-degree jump. But what's really interesting is why the engineers built it. This isn't a new version of Atlas intended for customers. It's an experiment to understand how far they can push the robot's motors and control systems. And the hardware modification was surprisingly simple. The team replaced the feet with off-the-shelf scooter wheels, using just one custom adapter design to connect them to the existing ankle actuators. The real challenge was getting the robot to control them. Atlas uses reinforcement learning, where a controller learns movements through millions of simulated experiences before being deployed on the physical robot. But there's a problem. Simulated motors don't automatically behave like real ones. If the simulation assumes a motor can deliver more torque or respond faster than it actually can, the robot might learn movements that are physically impossible. So the team carefully matched the simulated motors to their real-world behavior, including how they perform under high loads and at different speeds. With a few adjustments to the training setup, Atlas learned to roll smoothly while maintaining balance. And some pretty fascinating behaviors emerged. When performing sideways dashes, for example, the controller learned to steer the wheels in ways that resemble the sliding movements of a human. What's particularly interesting is that the lessons from this experiment are already being applied to the regular walking version of Atlas. I love seeing projects like this because they show that making robots more capable isn't always about adding more complicated hardware. Sometimes changing one component is enough to discover entirely new ways for a robot to move. Credit: @BostonDynamics 👉 Follow for more if you are interested in robotics!
8
19
4
127
19,129
車輪履いたAtlas、マジでサイドスワイプじゃん うひょーかっちょいー
4
304
私もこれです ただカッコいいロボを操縦したかった まあ結局趣味活に落ち着いてしまったけど…
工学部全員がこうだと思われるのは心外 実際はこんなやつ半分ぐらいで残り半分はガンダム作るために来てるから
3
1
42
9,106
歩行安定性向上やカメラ搭載等色々とアプデして望んだ本イベント 操縦の没入感を高めるためのカメラ映像配信が、まさかのバグで動かず…! とはいえロボ自体は終日良く動いてくれたし、データも取れたので全体としてはプラス おつかれさまでした! #NT湘南
3
30
780
NWK/野分機械 retweeted
野分機械 カッコいいロボ!モデルベースから強化学習に進化して歩行を安定化させているとのこと。 #NT湘南
3
43
1,406
コックピット視点操縦システム、解禁!! 基本動作テストの様子を記録 (歩行、攻撃、push) ゆれるゆれる!でもカッコいいからいいのだ!! (…もっと広いところで歩かせたい💦) #ホビロボ制御 #Sim2Real
1
6
29
773
装着! 全体像、攻撃時の動画、正面比較 (※正面比較は右腕が旧、左腕が新) かっこよくできた!いいかんじ!
肘先のアップデート ブラケットの一体化 肘の外側は張り出させ、内側は削り、形状の変化をつける その他全体的に形状を流線型にしつつ内側にリブを追加してかっこよく
37
578
肘先のアップデート ブラケットの一体化 肘の外側は張り出させ、内側は削り、形状の変化をつける その他全体的に形状を流線型にしつつ内側にリブを追加してかっこよく
1
13
817
もろもろ導通! NT湘南間に合いそう! #ホビロボ制御
3
26
615
上半身の傾き制御をRLカリキュラムにも組み込み、RLポリシー歩行でも使えるようになりました 画角調整のためなので、いままでのロールピッチだけでなくヨーも扱えるように ちゃんと学習でIMUの搭載位置も考慮してるので、胸部がこんだけ回っても一応歩けます #ホビロボ制御 #Sim2Real
1
16
133
2,670
挙動がSFメカのホバー移動そのものですごい マイロボにもスラスター載せたい! (重量が。。。)
ガンプラでボーダーブレイクできるかも
1
19
906
Zero 2 W移行後、DELTA-VのRL歩行が不安定に。制御周期は守れており、DRでも改善せず原因不明だった。 実は、前周期のactionを周期冒頭に送るはずが、推論終了後に送っていた潜在バグが発覚。CM5では3msだった推論時間が12msに増えたことで顕在化した模様。 修正したらかなり安定した。よかった。
15
657
Zero2Wに移行、さらにカメラ付きで復活! #ホビロボ制御
1
5
66
1,592
カメラは保護、デザインは両方の観点でもうちょいちゃんと隠したい まずは簡単にこれでよいかなと
1
183
02Wいける!いけるぞ! 希望が見えてきたかも!
(悲報) CM5、死す 処理を止めても温度が90度以上に張り付くようになり、復旧できないまま逝ってしまわれた模様。。。 今買い直すと高いので02Wで代替を進める 現状、かつかつだがなんとかなるかも?という感じ
12
605
(悲報) CM5、死す 処理を止めても温度が90度以上に張り付くようになり、復旧できないまま逝ってしまわれた模様。。。 今買い直すと高いので02Wで代替を進める 現状、かつかつだがなんとかなるかも?という感じ
1
7
826