Pinned Tweet
I asked Opus 5.5 to explain camera focus by building an interactive lens lab
Here's what it came up with after 1 hour 26 minutes in one shot, $25.66 API cost
lens.lab.sael.net
Move the focus ring and you can see the glass elements shift the sharp plane through the scene
The IKEA 3D interactive manual now has 23 more pieces
sael.net/flatpack
Forgive me if a step’s a bit off.
@IKEA didn’t pay me for this
which piece should I add next?
IKEA manuals, but they come to life.
I built the real BILLY instructions in 3D, so you can watch every step happen exactly as drawn. try it: sael.net/flatpack
IKEA manuals, but they come to life.
I built the real BILLY instructions in 3D, so you can watch every step happen exactly as drawn. try it: sael.net/flatpack
I just added more pieces
xitter.cf/RyanSael/status/211290…
The IKEA 3D interactive manual now has 23 more pieces
sael.net/flatpack
Forgive me if a step’s a bit off.
@IKEA didn’t pay me for this
which piece should I add next?
most people have no idea what to do with a flat tyre
this interactive 3D guide might save you one day:
sael.net/flat-tyre
How a key works. And how lock picking works.
You'll never look at your front door the same way
sael.net/pin-tumbler
not sure if good or bad news for interior designers
sael.net/interior
opus 5.5 is scary good at it
I built a laser that cuts fractions.
wish I had this in school:
sael.net/fraction-kitchen
interactive 3D math - part 1
if you’re new here, I’ve got more stuff like this on my profile and my website sael.net.
go check them out, cheers!
xitter.cf/RyanSael/status/211003…
xitter.cf/RyanSael/status/211201…
imagine how much paper we could save if every manual went digital and interactive.
@EU_Commission would love this, right?
IKEA manuals, but they come to life.
I built the real BILLY instructions in 3D, so you can watch every step happen exactly as drawn. try it: sael.net/flatpack
I've been posting 3D stuff regularly, and it's available on sael.net too
if you just found me on X, I've been creating 3D explainers and doing some general exploration, and posting them on my website, all free to access
xitter.cf/RyanSael/status/210594…
xitter.cf/RyanSael/status/210523…
all of the above were made with @threejs and @claudeai Opus 5.5
I did try with Gemini 4 Argon separately here:
xitter.cf/RyanSael/status/211199…
