If you are in the Houston area be sure to check out the biggest party of the year... the Houston Arcade Expo!
I hope to see you there.
Arcades, Pinballs, Consoles & Computers
houstonarcadeexpo.com/
Quick replacement of a couple of capacitors on the Exidy Sorcerer II power supply. There are tantalums on the main PCB, so I'll probably go ahead and replace those too.
2
6
534
I figured I'd try my hand at developing a ROM cart for the Exidy Sorcerer II as it didn't look like there was anything like that available for the platform.
This is a simulation of the cart running in MAME. The firmware is RP2350 based, so it should be cheap to manufacture.
The Exidy Sorcerer II booted right up with the BASIC cartridge. The Sorcerer used 8-track shells for its cartridge solution.
KickStart Wheelie King now boots on the Taito SJ core, I've been chasing an MCU issue only to figure out it was a 'stuck' coin input. This game is the only title that has the coin inputs as active high and it was throwing an invisible IO error.
Now to implement the line by line scroll so the road can curve left and right.
Here's the latest addition to my computer collection. You don't see one of these everyday. The Exidy Sorcerer II.
That's one way to automate programming of an Altair 8800 ...
#VCFSW
Here's another picture showing my friends PAT9000 at VCFSW with Quasar running on the Vector Monitor.
Jetpac Taito System SJ demonstrated on a PAT9000 at Vintage computer Festival Southwest.
#VCFSW
Jet Set Willy for the Taito System SJ can be found on GitHub at the following location:
github.com/antongale/taitosj…
Please let me know if you find any issues. I'm expecting there to be a few.
Arcade PCB & MiSTer ROMs are included.
If anyone is interested in testing the Taito System SJ Jet Set Willy, let me know. The test version of the game has the ability to turn collision detection off, infinite lives, warp mode and importantly turbo Willy!
Jetpac Taito SJ with starfield can be found at the following location:
github.com/antongale/taitosj…
Please let me know if anyone finds any issues. This update includes hi-score and player 2 code.
There has been some Taito System SJ Jet Set Willy progress this weekend. Still lots of finishing touches left.
Enemy collision detection now uses the Taito hardware registers, but this breaks the nightmare room where Willy's character is more than 8 pixels wide.
Another port for the Taito SJ no one asked for and I may never release, but still... I think I have a problem.
Writing Jetpac for the Taito SJ was genuinely insightful. The port ran fine on the core but had issues on real hardware.
For example, the coin slot has both a physical mechanism and a gated input on the PCB, and it has to be unlocked before it will accept credits. To do this, you write to an output register. The core never implemented this gate, so the issue only surfaced on real hardware.
The Beta release of Jetpac for the Taito SJ can be found on GitHub @ github.com/antongale/taitosj…

















