Pinned Tweet
How to Properly Use Frame Generation for GTA 6 — From the Veyra Developer
Hey everyone! I'm the developer of Veyra.
Ever since it was confirmed that GTA 6 would run at only 30 FPS, my community has been growing incredibly fast.
Many players have discovered Veyra through different platforms and started using it. First of all, I'd like to thank everyone for your support and appreciation!
We currently have over 2,000 players in our community, and Veyra has also started gaining quite a bit of attention overseas.
So there's no need to worry too much about the software's usability or overall experience.
We've pushed capture card latency optimization almost to its absolute limits.
If you've previously tried using OBS or PotPlayer for capture and found the latency too high, I strongly recommend giving Veyra another try.
I think you'll notice a completely different experience.
How to Get the Smoothest Frame Generation Experience with 30 FPS Games
I'd like to share some tips on how to properly use frame generation with 30 FPS games while minimizing latency as much as possible.
First, even when playing a game running at 30 FPS, I still recommend setting your capture card to 60 FPS.
Why?
Because capturing at 60 FPS can actually provide lower display latency than capturing directly at 30 FPS.
The reason is illustrated in the image below.
As you can see, capturing at 60 FPS can reduce latency by more than half compared to capturing at 30 FPS.
However, when capturing a 30 FPS game at 60 FPS, half of the captured frames will inevitably be duplicates.
For example:
Original 30 FPS frames: ABCDEFG
Captured at 60 FPS: AABBCCDDEEFFGG
If you apply frame generation directly to these duplicated frames, the algorithm will try to interpolate between identical frames, resulting in poor frame generation quality.
Here's how to fix it:
Go to the Frame Generation section in Veyra and enable "Remove Duplicate Frames" or "60→30".
This converts the 60 FPS capture stream back into 30 unique frames.
As shown in the middle image above, you'll still maintain approximately the same low capture latency as 60 FPS capture.
At the same time, frame generation will no longer waste its work on duplicate frames, resulting in significantly better smoothness and visual quality.
🎮 Choosing the Right Frame Generation Model
For games running at 30 FPS, I strongly recommend using VFG instead of DLSS or XeSS frame generation.
The reason is simple: at such a low base frame rate, DLSS and XeSS struggle to avoid ghosting and jelly-like distortion.
With VFG in High Quality mode, you can achieve an image with almost no noticeable ghosting or warping artifacts.
If your GPU is powerful enough, the smoothness is genuinely incredible.
However, there's a catch: VFG High Quality is extremely GPU-intensive.
In my testing with an RTX 5070, generating a single frame at 4K using VFG High Quality takes approximately 20 ms.
This makes it mainly suitable for games running at 30 FPS.
But when it works, the result is unbelievably smooth. Seriously, smooth as silk.
What about Medium Quality?
VFG Medium Quality still produces significantly better results than DLSS or XeSS in low-FPS scenarios.
More importantly, its performance overhead is approximately 3–4 times lower than High Quality mode.
I highly recommend experimenting with both modes to find the best balance for your GPU.
🔍 Choosing the Right Super Resolution Model
I've noticed that many users still prefer DLSS SR.
However, because Veyra doesn't have access to the game's internal rendering pipeline, DLSS SR cannot deliver its full potential in our application.
The actual improvement is fairly limited.
Instead, I recommend using RTX Video Super Resolution.
Set the quality to Medium.
It provides a noticeable improvement in image quality without consuming too much GPU performance.
⚡ About Capture Card Latency
Let's talk about capture card latency.
Currently, most capture cards on the market use either 5 Gbps or 10 Gbps USB interfaces.
Across different brands, latency differences between capture cards using the same chipsets are generally quite small.
The main advantage of 10 Gbps capture cards is support for higher-bandwidth formats, including:
4K 60 FPS NV12
1440p 60 FPS HDR
4K 30 FPS HDR
Here are some approximate latency measurements:
Capture FormatLatency1440p 60 FPS NV1210–20 ms4K 60 FPS NV1230–40 ms4K 30 FPS P010 (HDR)80–100 ms
So, if you're extremely sensitive to latency, you can actually capture at 1440p 60 FPS NV12 and then use super resolution to upscale the image.
This gives you a much lower-latency gaming experience.
Although, to be fair, most people aren't nearly as sensitive to latency as they think they are.
Not everyone is an esports professional, even if they think they are. 😂
If you absolutely want native 4K resolution and native HDR, there's not much you can do.
Just get a PCIe capture card.
But if you're happy with RTX HDR, you can save yourself some money.
Simply enable RTX HDR inside Veyra.
The results actually look pretty damn good.
🛒 Recommended Capture Cards
5 Gbps Capture Cards
Supported formats:
1440p 60 FPS NV12
4K 30 FPS NV12
These are my first choice for 1440p users who don't need HDR. They're also suitable for 4K users who can tolerate slightly higher latency.
Recommended models:
MICHENSEN T800 / T900
KUHAIMI 27P / 26P
ACASIS 007 Pro / 009 Pro
AVerMedia GC553 Pro / GC551G2
Elgato HD60 X
10 Gbps Capture Cards
Supported formats:
1440p 60 FPS HDR
4K 30 FPS HDR
4K 60 FPS NV12
Recommended models:
MICHENSEN T911
KUHAIMI G50
AVerMedia GC553G2
Elgato 4K X
PCIe Capture Cards
Supported format:
4K 60 FPS HDR
Recommended models:
AVerMedia GC573
Elgato 4K Pro
For capture cards with the same specifications, feel free to choose whichever brand you prefer.
Based on my testing, latency differences between comparable models are generally within 5 ms.
There's no need to spend a fortune just for a different brand name.
That's all for now. Enjoy your games, everyone! 🎮
A lot of people have misunderstood what Veyra is actually capable of. They think you need a $500+ capture card to enjoy smooth gameplay. But based on our team's testing, that's simply not true.
In China, tons of players are using capture cards that cost just $25–$70, and they're still able to enjoy GTA 6 at 60 FPS with low latency through Veyra.
Of course, those prices are based on the Chinese market. In the US, you might be looking at around $100 instead. And honestly, for the greatest game of all time, GTA 6, I think spending $100 is absolutely worth it.
But before buying a capture card, make sure you check its supported capture formats.
Look for these formats:
1440p60 NV12
4K30 NV12
4K60 MJPEG
I don't personally recommend using MJPEG, but if a capture card supports 4K60 MJPEG, it means it's using the latest 5Gbps capture chipset.
The brand really doesn't matter. As long as the card supports the formats I mentioned above, it's using the exact same chipset and hardware solution as the Elgato HD60 X.
That means the latency difference between them is less than 5ms.
In other words, you can get the same performance as an Elgato HD60 X for a fraction of the price.
And here's the funny part: those so-called "frame generation capture cards" are basically a scam. They're all using the same chips under the hood. The only thing that's different is the fancy plastic shell you're paying extra for. LOL.
Once you've got your capture card, check out my pinned post and follow the recommended settings to get the best experience.
Trust me, you'll come back and thank me later.
This is absolutely the best way to experience GTA 6. 60 FPS GTA 6, here we come!
现在一打开X,就全部都是Veyra,谁能想到两个月前它还是一个简陋的不能再简陋的程序?
I finally managed to get #GTA6 running at 60 FPS with DLSS 5 Neural Rendering X2 thanks to the Veyra program. I never imagined this would be possible at launch!!! 🤯🤯🤯
Setup: PS5 Pro, NVIDIA RTX 4080, Veyra Frame generation x2 with Nueral Rendering x2
1
2
922
🚀 Veyra 2.2.0 is OUT!
This is a BIG update!
✨ What's new:
• Windows installer & built-in updates
• Real-time AI subtitle translation
• OBS Virtual Camera support
• Sharper fullscreen scaling
• Smarter frame generation & HUD locking
• Improved PS5 streaming, capture & HDR
• Tons of bug fixes and stability improvements!
30 FPS → 120 FPS. The GTA 6 dream continues. 🔥
Free & open-source.
Download: github.com/Likely7/Veyra-NRV…
If you want to play GTA 6 at 120 frames per second, and you also want to use DLSS 5. Be sure to download Veyra – xQc is also using it.
还有谁不相信Veyra可以运行120FPS的GTA6?
Usando a placa de captura do meu PC e o programa Veyra, consegui rodar GTA 6 a 60 FPS, 2K e com os gráficos tunados no PS5 base.
Tem um pequeno input lag, mas nada que atrapalhe, está muito melhor do que jogar a 25 FPS com o gráfico todo borrado.
Obrigado @FinamorDaniel pela dica!
Quelqu’un a testé ? Voit le délai en 60 FPS ? J’ai pas encore ouvert le jeu j’attends de pouvoir stream
F**k, people are already playing GTA 6 on PC and Rockstar never even made a PC version!!
A free app called Veyra streams it from your console to your PC and runs your GPU's upscaling and frame gen on top.
The setup:
1. Turn on Remote Play on the PS5 (Settings, System, Remote Play)
2. Download the NVIDIA or AMD zip from the repo's Releases and run veyra_qml_ui.exe (Windows 11 only)
3. Pick PS5 on the home screen, find your console, and pair it with your PSN account ID and the 8 digit code from Link Device
4. Turn every effect off first, then add upscaling, then frame gen
112K downloads already, and the latest release is literally named after GTA 6.
It's still a compressed Remote Play stream with frame gen on top, so expect some lag. Better for driving around than shootouts.
Repo in the reply 👇
Great! It's not just Chinese streamers who are using Veyra. People all over the world are using it! My three months of effort were definitely worth it. Thank you everyone for enjoying Veyra, and thank you!
4
990
I single-handedly propelled the Veyra-driven global capture card market. @Elgato, I believe you should compensate me for the advertising I've generated. In China, nearly all capture cards costing around 1000 RMB with a 10Gbps interface have already been sold out. Therefore, you should be aware of the significant number of Veyra users and the positive user experience.
就是这样!感谢大家喜欢 veyra❤️
i ran GTA VI on my PC through an RTX 5080, look at this picture, it's f*cking incredible
on every PS5, even the Pro, the game is locked to 30 fps. on my PC the same frames run at 60 with DLSS 5 lighting, that's the bottom half of the video
here's what i measured and how to set it up on yours in 5 minutes:
what the test showed:
• in 80 seconds of gameplay the console put out 2,351 real frames, my PC put out 4,700
• DLSS 5 takes 4.1 ms per frame, frame generation 1.5 ms, the GPU sits at 39%
• 60 fps holds in real time, 56 in the worst 1%
• half the frames in a PS5 stream are copies: the game renders 30, the console sends 60
and it's not just me:
- Rockstar locks GTA VI to 30 fps on every console, PS5 Pro included (Digital Foundry)
- Veyra, the app all of this runs on, has 112,000+ downloads (GitHub)
can you put DLSS 5 on the PS5 itself? no. the PS5 has an AMD GPU with no NVIDIA cores, and a jailbroken console won't run GTA VI, it needs the latest firmware. but the PS5 can stream to a PC, so no $200 capture card needed
how to set it up on yours:
1. paste the prompt from the first comment into Claude Code or Codex, the agent checks your GPU, installs Veyra from my repo and sets the GTA VI preset
2. on the PS5 turn on Remote Play: Settings > System > Remote Play
3. same menu, hit Link Device and type the 8 digits into Veyra
4. in Veyra set PS5 streaming to 1080p, 60 fps, H.265
5. in Pro mode turn on NR "RTX 50 · NVIDIA original" with 2 layers and Frame Gen DLSS 2X, 4X on a 120 Hz screen
6. go fullscreen and hold V to see what the console alone looks like
works on RTX 40 and 50, DLSS 5 needs an RTX 50. controls still react at 30 fps, the picture is what gets smoother
do it before your unlock tonight. prompt and repo in the first comment
how people are cashing in on this launch is in the article below















