OPTIMUM Platform

In the last 1.5 years we had to renounce most of the presence workshops within our consortium. We were therefore very pleased to welcome part of the consortium back to our #Demag Research Factory from 18 - 19 August. #Optimum #research

Within this workshop, the routine for #CAN-Bus-Initialisation was improved, the localisation tag was reflashed and then reattached centrally between the two driven wheels of the AGV. For more: optimum-itea3.eu/demagresear… #industry40 #jointTechnologies #IoT #DEMAG #COMNOVO

In this workshop position data in 3D visualization was corrected by using different factors and offsets, which enabled an adjustment through a simple multiplication with the already available position data. For more: optimum-itea3.eu/remote-work… #industry40 #jointTechnologies #IoT

Thanks to the great effort of the entire team, all sources of error were eliminated in the end of this project and the digital twin of the #AGV was successfully displayed. For more: optimum-itea3.eu/100003034.h… #industry40 #jointTechnologies #IoT #taraVRcontrol #digitaltwin

After 3 years of intensive #research and #technology development there is much to tell about technical #innovations and ground breaking prototypical implementations. For more: lnkd.in/dtse9ND #iot #future #innovation #internetofthings #project #retrospective

The Turkish demonstrator #ERMETAL used innovative functions from OPTIMUM for a safer and more efficient #coil transport as well an intelligent #warehouse #management. For the visualization: optimum-itea3.eu/turkish-dem… #iot #future #innovation #internetofthings #project

The Spanish demonstrator at #MAGTEL actively interacts with the operator using a #robotic arm, #cameras and #projectors. Explore this inspiring project: optimum-itea3.eu/spanish-dem… #iot #future #innovation #internetofthings #project #MAGTEL

The Korean demonstrator at #ETRI illustrates innovative #assisstancefunctions in two different scenarios. Find out more about the scenarios: optimum-itea3.eu/korean-demo… #iot #future #innovation #internetofthings #project

The DEMAG Research Factory with the implemented demo assembly process is shown in the following #3D animation with the simulation tool #TaraVRbuilder developed by #Tarakos: For the animation: optimum-itea3.eu/german-demo… #iot #future #innovation #internetofthings #project #demag

OPTIMUM, a joint collaboration across 6 countries, is a research project in which it was managed to #prototype technologies in 15 demonstrators in South Korea, Spain, Turkey and Germany. For more: optimum-itea3.eu/optimum-joi… #industry40 #jointTechnologies #IoT #prototyping

Industry4.0 triggers a lot of challenges being the breeding ground of OPTIMUM project. Efficiency of processes and an optimum outcome are the pre-requisite for #smart factories in future. For more: optimum-itea3.eu/optimum-ret… #iot #future #innovation #internetofthings #project

optimum-itea3.eu | Busy month: October 2018 – The Consortium meets in Leipzig to discuss sequencing diagrams – hosted by #ERSTE #OptimumPlatform #research #automation #iot #iiot #future #smartfactory #industrie40 #industry #Smartfactory Read More: optimum-itea3.eu/october-201…

optimum-itea3.eu | Busy month: On 22nd and 23rd October 2018, the majority parts of the Project Coordination Committee (#PCC) met at Carlos III University in Madrid (#UC3M). #OptimumPlatform #manufacturing #innovation #software #ITEA_3 Read More: optimum-itea3.eu/busy-month-…

optimum-itea3.eu | The project meeting of the #OPTIMUM consortium took place on 29 and 30 January at Linde MH's headquarters in Aschaffenburg. #softwareengineering #iot #iiot #Smartfactory #industrie40 #industry #tech #business #ITEA_3 Read More: optimum-itea3.eu/january-201…

optimum-itea3.eu | Very exciting March 2019 – First #ITEA3 Review in Hamburg hosted by #NXP and #DEMAG #OptimumPlatform #innovation #Management #digitalmarketing #technology #manufacturing #innovation #manufacture #software #automation Read More: optimum-itea3.eu/very-exciti…

optimum-itea3.eu | Partners came together on 10th of October 2018 to start drawing Message Sequence Charts(#MSC) for several use cases and to share introductory information on DOME... #OptimumPlatform #ITEA3 #M2M #research #project #tech Read More: optimum-itea3.eu/march-2019-…

optimum-itea3.eu | From 9th to 11th of April 2019 most of the project-consortium working on the publicly funded Research Project #OPTIMUM enjoyed being at #KONECRANES in Hyvinkää, Finland. #automation #innovation #ITEA_3 #technology Read More: optimum-itea3.eu/april-2019-…

optimum-itea3.eu | Successful start of the #DEMAG on May 2019: In the anniversary year of the company's foundation, another milestone in the history of #innovation is reached at the Wetter site. #OptimumPlatform #tech #automation #ITEA Read More: optimum-itea3.eu/may-2019-ce…

optimum-itea3.eu | As part of its 200year anniversary celebrations, #DEMAG hosted a Customer Day and an Open Day. These two events were utilized to present... #OptimumPlatform #ITEA_3 #automation #Research #development #networking Read More: optimum-itea3.eu/september-2…