
@Arjunsssssssd 's alt Space ,Tech & Defence enthusiast
Joined July 2026
- Tweets4K
- Following105
- Followers775
- Likes10.5K
Arjun retweeted
And the things is that this isn't the case with Electronics only
Automobiles, Engineering goods, Machineries, pharma, semiconductors , railways and etc etc
All of these are going through capacity build-up & when they all starts to contribute , the numbers will be simply amazing
This is when much of our electronics capacity build-up and expansion is yet to come online or is still in its early stages of production
Take PCBs, the biggest contributor to H1 FY2026-27 growth
Production is expected to rise from $0.6 billion in FY2024 to $3.8 billion by FY2029
India's electronics exports jumped by 44% to ~$32 billion in the first half of 2026-27. But the heartening story is that non-smartphone electronics exports grew by 56.5% to $13.79 billion, faster than phone exports at 35.8%.
manufacturing.economictimes.…
Arjun retweeted
This is when much of our electronics capacity build-up and expansion is yet to come online or is still in its early stages of production
Take PCBs, the biggest contributor to H1 FY2026-27 growth
Production is expected to rise from $0.6 billion in FY2024 to $3.8 billion by FY2029
India's electronics exports jumped by 44% to ~$32 billion in the first half of 2026-27. But the heartening story is that non-smartphone electronics exports grew by 56.5% to $13.79 billion, faster than phone exports at 35.8%.
manufacturing.economictimes.…
Arjun retweeted
How do you inspect and maintain a reactor no human can ever enter?
@PranosFusion is building tokomaks, where maintenance must be fully remote. @armatrix_IN builds snake-like robotic arms for exactly those tight spaces.
Building fusion's supply chain from India 🇮🇳🦾⚛️
Watch 👇
Arjun retweeted
Absolutely 10/10.
Probably one of the best piece of media I’ve ever watched.
I’d been sitting on it for so long, assuming it was just some kind of slice-of-life or romance stuff but
I couldn't have been more wrong
Arjun retweeted
Battery cell manufacturing in india :
🟢 Commissioned Capacity -
1) OLA electric :
> 6 GWh Commissioned
> NMC & LFP
> targets 20 GWh by 2028
> Long term target - 100 GWh
2) Exide
> 6 GWh Commissioned
> NMC & LFP
> Addition 6 GWh planned
Total - 12 GWh Capacity Commissioned
Battery cell manufacturing in india :
🟢 Commissioned Capacity -
1) OLA electric :
> 6 GWh Commissioned
> NMC & LFP
> targets 20 GWh by 2028
> Long term target - 100 GWh
2) Exide
> 6 GWh Commissioned
> NMC & LFP
> Addition 6 GWh planned
Total - 12 GWh Capacity Commissioned
🔴 Announced / MoU / Hold -
1) JSW :
> Phase-1 : 10 GWh
> Additional 40 GWh expansion in phases
*The project was put on hold due to difficulties securing an LFP tech partner.
However, JSW has partnered with COEP Pune to develop indigenous Li-ion & sodium-ion cell technology
Arjun retweeted
It's happening !!! 🚨 🚨
Jio Platforms Ltd has begun talks with Skyroot Aerospace, the Indian Space Research Organisation and other domestic companies to launch satellites for its planned satellite internet service
No more slandering Mota Bhai from now
finance.biggo.com/news/d42b3…
It's happening !!! 🚨 🚨
Jio Platforms Ltd has begun talks with Skyroot Aerospace, the Indian Space Research Organisation and other domestic companies to launch satellites for its planned satellite internet service
No more slandering Mota Bhai from now
finance.biggo.com/news/d42b3…
Arjun retweeted
For those calling our manufacturing as screwdriver technology: Designed in India, Made in India 5-axes precision CNC machines with the accuracy of 2 microns! For reference, the thickness of human hair is about 80 microns.
(5-axes = x, y, z, rotate, turn)
This is the way electronics and semiconductor manufacturing ecosystem is taking shape.
India now manufacturing things that go into things that go into things…
Arjun retweeted
Pegasus hot-firing campaign have begun
And yes, the hot-firing campaign has begun for the Pegasus. Exciting next few weeks 💪
Here’s an oversimplified version of what the hot flow/firing campaign (a series of 140 tests distributed between pressure-fed and pump-fed) entails starting today;
Thrust Chamber Assembly Qualification:
One of the most critical bits when developing any high thrust class engine is to eliminate combustion instabilities, and that’s what we’re starting with - injector hot flows with ignition fluid.
1. Ignition Trials with start/shut sequences on Injector/Constant Area combustor test articles
2. Constant area combustor firing
3. Capacitively cooled Combustor firing.
4. Calibration test on the full TCA.
5. Ignition Trials and quick start/shut dynamics on full TCA
6. Short burst duration of TCA under pressure-fed mode.
7. Hot firing of TCA for half duty cycle
8. TCA destructive testing for material assessment and reusability studies
Turbo Machinery Qualification:
1. Full RPM Turbine Qualification - Cold Flow (Gaseous Nitrogen)
2. Fuel turbopump Qualification - Water
3. Oxidizer turbopump Qualification - Water
4. Oxidizer turbopump Qualification - LOX
As for the tests already done, brilliant cold flow and turbomachinery run results. Will share a few updates shortly. Mad results so far. 👀
Pegasus hot-firing campaign have begun
And yes, the hot-firing campaign has begun for the Pegasus. Exciting next few weeks 💪
Here’s an oversimplified version of what the hot flow/firing campaign (a series of 140 tests distributed between pressure-fed and pump-fed) entails starting today;
Thrust Chamber Assembly Qualification:
One of the most critical bits when developing any high thrust class engine is to eliminate combustion instabilities, and that’s what we’re starting with - injector hot flows with ignition fluid.
1. Ignition Trials with start/shut sequences on Injector/Constant Area combustor test articles
2. Constant area combustor firing
3. Capacitively cooled Combustor firing.
4. Calibration test on the full TCA.
5. Ignition Trials and quick start/shut dynamics on full TCA
6. Short burst duration of TCA under pressure-fed mode.
7. Hot firing of TCA for half duty cycle
8. TCA destructive testing for material assessment and reusability studies
Turbo Machinery Qualification:
1. Full RPM Turbine Qualification - Cold Flow (Gaseous Nitrogen)
2. Fuel turbopump Qualification - Water
3. Oxidizer turbopump Qualification - Water
4. Oxidizer turbopump Qualification - LOX
As for the tests already done, brilliant cold flow and turbomachinery run results. Will share a few updates shortly. Mad results so far. 👀
$90 billion in exports
Oct 2026 was by a long distance the best month of exports in Indian trade history - over $7 billion more than the previous record in Aug.
The next question is what about the $1 trillion export target ? Let's look at that next.
1/
India’s merchandise exports reached USD 309.06 Billion during April–October 2026–27, registering a growth of 21.96% over the corresponding period of 2025–26.
The continued growth highlights the strength of India’s merchandise exports and their expanding contribution to international trade.
#IndiaTradeUpdate #TradeGrowth #DoC_GoI @PIB_India @RajeshAgrawal94


















