For anyone who wears Zimi and owns a Portacount (or Bitrex + nebuliser) it might be a good idea to re-test your masks if you wear them for high risk indoor.
9541V-03 headloops getting 40-80 for static tests (expected 300+).
The 9541V-03 in the Excel is an older batch from 2025.
For people who wear Zimis for long periods and get pressure sores: 3 strips of 3M Nexcare tape (13mm high) may prevent them with no impact on seal (but do a fit test). Comes in 12 and 25mm widths.
ZM9541V worn 12hr daily for multiple weeks in China was super comfortable.
Noms780 retweeted
We want to be proven wrong, but until public health does their job we are all in deep trouble. Here is the link to 488,000 publications on the dangers of Covid.
ncbi.nlm.nih.gov/research/co…
I recently tested an Ausair Airweave M mask which scored 5.3 to 6 (held to face) on N99 mode Portacount test (filter + seal). ~82% filtration.
So either the filter is low quality, there is a leak, or both.
They claim >99% filtration for viruses, bacteria, PM0.1, and PM0.3.
Noms780 retweeted
I made this step by step video for a friend who is going to use PlusLife for the first time and figured I’d share it here as well. PlusLife is a nucleic acid amplification test for the detection of SARS-CoV-2 and other viruses. More info about it here: virus.sucks/pluslife_en/
Re-post to correct typo.
🧵1/4
Total inward leakage (TIL) tests for a 5 year old child (half-asian, low NB):
95S-03 black - 1280
95S-03 white - 320
95S-02 white - 527, 326
95W-03 white - 44, 38
Rackmask KN95 purple - 1760, 1150
Rackmask KN95 navy - 1350, 720, 826
🧵5/4
The reason for doing the "N95 mode" (Seal) tests was to test my hypothesis that 95S-03 (deeper notch) might leak more than 95S-02 (flatter notch) on the child's low nose bridge.
However, this was not the case as both styles gave similar scores (1000 to 2400).
1
10
453
Noms780 retweeted
Zimi's new generation XS soft frame is now available for sale at zimiair.com.
The XS soft frame is now a second-class product with defects on the edges. However, it does not affect the functional use. Of course, you can continue to wait for the improved XS soft frame (it is expected to wait for 3 months for the major mold change).
The new soft frame has an "XS" logo on both sides.
The XS frame is used with an S-size filter element. We will not launch XS-size masks and filters for the time being.
Please use the S-size filter element (7711F) with the XS frame. In the leakage test report of a third-party laboratory in China, the sealing effect is very good. The minimum value exceeds the KN95 leakage limit specified in GB2626-2019 by more than 20 times, and exceeds the KN100 leakage limit by more than 4 times. Edge defect photo link:teapawt.org/zhouliang_mask/status/…
Noms780 retweeted
Covid-cautious community understands that CO2 levels serve as a proxy for Covid risks, as it indicates the amount of secondhand air in a room. Lower CO2 level typically means better ventilation and reduced risk. However, relative particulate matter (PM) levels can also act as a proxy for Covid risk, when air purification is in progress.
Relative PM level is calculated as the ratio of PM levels after purification to before purification, or the ratio of indoor to outdoor PM levels. This measure reflects the effectiveness of air purification in the room. A lower relative PM level indicates better purification and, therefore, a lower risk.
In the Chinese Covid-cautious community, our goal is not only achieve low CO2 levels but also low relative PM levels, indicating effective ventilation and air purification simultaneously.
Steps to modify a Zimi mask to fit the taller nose bridge of a European testing mannequin (EN149 is the European respirator standard).
1. Split wave foam on the nose bridge.
2. Double flat foam on the sides.
Link to thread is below the screenshot.
1/5,Previously, we mentioned using different structures of sponge strips in the Zimi frame to improve the fit of the mask and relieve facial pressure. Today, we modified the sealing ring and used sponge strips to make the ZM8210 fit the head mold on the EN149 testing equipment (hereinafter referred to as the EN149 head mold). This method allows everyone to customize a close-fitting mask of their own.
Noms780 retweeted
The 95SF black filter is now available at zimiair.com.
🧵1/X
I posted the following in Gerard's Discord but have only tested one model (Zimi ZM9541) by comparing the flat vs "split wave" Zimi foam (2nd photo).
---
1st photo is ZM9541 with innermost sections of the filter cut away.
With the mask donned, the entire sealing surface
🧵5/X
(it does not need to be perfect). The notch shape depends on your individual nose.
I still need to repeat the "filter cutaway" experiment with
ZM7711 (a narrower shape which I know fits me poorly) and
ZM9233 (different fabric cutout to ZM9541).
Thanks for reading
/end
1
2
546
🧵6/X Continued ...
teapawt.org/noms780/status/1846458…
🧵1/X
Zimi ZM9233 (M) with middle part of filter cut away to reveal the sealing surface (careful to avoid cutting the grey fabric).
With 😷 donned you can now assess the seal quality and impact of flat/wave foams and notch shape.
Examples in following pages.
1
370
🧵1/X
Zimi ZM9233 (M) with middle part of filter cut away to reveal the sealing surface (careful to avoid cutting the grey fabric).
With 😷 donned you can now assess the seal quality and impact of flat/wave foams and notch shape.
Examples in following pages.














































